Step 6: Mount spare tire and tighten the nuts Next, pull the tire off the wheel brace, keeping your hands and arms as clear as possible from under the wheel arch.

Step 5: Remove the flat tireĮntirely remove the wheel nuts with the wrench and put them in a pile next to you. Next, turn the jack wrench to a height of between 10 to 15 centimeters off the ground. Place the jack behind the front wheels or in front of the back wheels just under the door. Fix the wrench on the nut, stand up and apply counter pressure with your foot. Use your foot to move the twist so you can save energy and loosen the nuts faster. To loosen the nuts, use a wrench and turn in a counterclockwise direction. The best way to loosen the wheel nuts is while the tire is still on the ground, meaning it is not jacked up yet. This relatively simple step can be skipped over, but it’s always best to be safe rather than sorry. The wheel chock should be applied to the wheel opposite to the tire you are changing. To lock the wheels in place, you need a wheel chock. This step is crucial so the car doesn't roll forward in the following stages and can save you from catastrophic injury. This keeps both you and other drivers safe by making both you and the vehicle visible. Next, you need to put on a high-visibility jacket and put some hazard signs at the front and back of the car.

This means rolling the vehicle to a safe place, applying the handbrake and getting your spare from the boot. Safely changing a tireĬhanging a tire is essentially a seven-step process that anyone can complete. This means that you may not have access to the internet or even another helpful human who can walk you through the process or complete it for you.īeing prepared means knowing what you need to change a tire and how to be safe while doing so. It can be even more challenging if a flat tire happens in an inconvenient location. Changing a car tire can be a nightmare if you don't know how or don’t have the right equipment on hand.

Flat tire